Black Friday: 50% off every paid plan with code BF50. Ends 5 December.

See prices

Free tool

Plywood calculator, sheets for a job and a cut list.

Work out how many sheets of plywood you need for a floor, wall or sloping roof from its area, the roof slope and your waste allowance. Or enter the pieces for a cabinet, shelves or a shed and see them laid out on each sheet, with the saw cut width taken into account, a table of what goes on every sheet and a drawing to save. Pick a 4 x 8 ft sheet or another size, and add a price for the cost.

Need a custom tool, app or website? Contact us 

What to find

16 x 12 is a rectangle. A line that starts with − is taken away, like a hole for stairs. For a sloping roof, type the flat size seen from above and the slope, like 6 for a 6 in 12 roof.

The first number runs along the long side of the sheet. Leave turning off if the grain direction matters.

Worked out in your browser. Nothing is sent anywhere.

Guide

How many sheets of plywood, with worked examples.

A plywood calculator tells you how many sheets to buy. For a floor, wall or roof it divides the area by the area of one sheet, after adding your waste allowance. For a project made of cut pieces, such as a cabinet, shelves, a shed or a workshop bench, it lays every piece on the sheets, leaves room for the saw cut, draws each sheet and counts them. You can pick a 4 × 8 ft sheet, a 4 × 10 ft sheet, a 5 × 5 ft sheet, a 1220 × 2440 mm sheet or type any size. Everything runs in your browser, and your inputs are remembered on this device until you press Reset.

How to use the plywood calculator

  1. Choose Sheets for an area or Cut list, then the Sheet size. For another size pick Custom size and type the length, width and unit.
  2. For an area, type one line per surface, like 16 x 12, and a minus line for holes, such as − 3 x 4 for a stair opening. Lines can also be circles or triangles, and each line can carry its own unit, like 4 x 8 m. Set the Waste percent.
  3. For a sloping roof, type the flat size seen from above and fill in Roof slope, the rise in 12. A 6 in 12 roof means 6.
  4. For a cut list, type one line per piece size: length x width x count. Fractions like 23 1/2 work. Set the unit and the Saw cut width.
  5. Tick Allow turning pieces 90° if the grain does not matter. Leave it off to keep every piece in the direction you typed.
  6. Add a Price per sheet to see the cost. Read the number of sheets. In the cut list, every sheet is drawn, a table lists what is on each one, and Save layout as SVG gives you a drawing to print or take to the workshop.

Sheets for an area

Sheets = area × (1 + waste) ÷ the area of one sheet, rounded up. A 4 × 8 ft sheet covers 32 square feet. A floor 16 ft by 12 ft is 192 square feet, which is exactly 6 sheets with no waste. With 10% waste it is 211.2 square feet, 6.6 sheets, so you order 7. The waste percent is your choice. A plain rectangle needs less. Floors with many cuts, such as around stairs or angled walls, need more.

Sheet sizes and their area

SheetSquare feetSquare metres
4 × 8 ft32.002.97
4 × 10 ft40.003.72
5 × 5 ft25.002.32
1220 × 2440 mm32.042.98

The 1220 × 2440 mm sheet is almost the same as a 4 × 8 ft sheet, but not exactly. The page uses the real size you pick, so a metric job gets a metric answer. Which sizes and thicknesses your supplier stocks is for the supplier to say.

Worked example: a sloping roof

A shed roof is 20 ft by 16 ft seen from above, with a 6 in 12 slope. The roof surface is longer than the flat plan, by the factor √(1 + (6 ÷ 12)²) = 1.118. So the area is 320 × 1.118 = 357.77 square feet. With 10% waste it is 393.55 square feet, which is 12.3 sheets of 4 × 8 ft, so you order 13. Without the slope you would count 11 sheets and be short. Other slopes give 1.031 for 3 in 12, 1.054 for 4 in 12, 1.202 for 8 in 12 and 1.414 for 12 in 12.

Cut list: how the layout is chosen

Pieces are placed in rows across the sheet. The saw cut width, or kerf, is left between pieces, because the blade turns that strip into sawdust. The page tries several row layouts: tallest first, longest first and biggest first, with the next piece put in the first row that has room or in the row where it fits tightest. When turning is allowed it also tries turning the sheet and the pieces. It keeps the layout that needs the fewest sheets. For two pieces of 36 × 24 in, six of 24 × 12 in and three of 48 × 16 in on 4 × 8 ft sheets, the pieces add up to 5,760 square inches and one sheet is 4,608, so at least 2 sheets are needed. The layout uses 2 sheets, with 62.5% of the wood used.

Reading the drawing and the table

Each sheet is drawn with its long side across. The purple outlines are the pieces with their sizes, and the caption under a sheet gives the share of it that is used. The table under the drawings lists the pieces on every sheet, with the count of equal pieces, so you can mark the sheets before you cut. The first number you type for a piece runs along the long side of the sheet. A piece that is wider than the sheet needs Allow turning pieces, or it will not fit and the page says so.

Grain, thickness and cut order

Plywood has a face grain, and for strength or looks you often want the grain to run a certain way. That is why turning is off at the start. If you type each piece with its grain direction along the first number, the layout keeps it. Thickness does not change the count, but it does change the price and the weight, so check the sheet you buy. Type the width of your own blade as the saw cut, since blades differ.

What the calculator leaves out

The row layout is quick and always valid, but a person with a pencil can sometimes save a piece by mixing the rows. It does not know about knots, defects or the repair patches on a sheet. It counts finished sizes, so edge banding or trim has to be added to the piece sizes you type.

Common problems

  • Forgetting the saw cut. Ten cuts of 1/8 inch take more than an inch of wood. Leave the kerf in.
  • Counting finished sizes. Cut lists use the size of each piece after cutting. Edge banding or trim adds to it.
  • Forgetting the slope. A roof is bigger than its plan. Use the slope box.
  • Mixing units. The area lines and the pieces can use different units, and a line can carry its own, like 4 x 8 m.

For other building materials use the concrete calculator, the board foot calculator and the gravel calculator. For square feet from sizes, the area and volume calculator helps.

Questions

Good to know.

How many sheets of plywood do I need?

Divide the area to cover by the area of one sheet and round up. A 16 by 12 ft floor is 192 sq ft, which is 6 sheets of 4 by 8 ft, or 7 with 10% waste.

How many square feet is a sheet of 4 by 8 plywood?

32 square feet, since 4 × 8 = 32. A 4 by 10 ft sheet is 40 and a 5 by 5 ft sheet is 25.

How do I work out plywood for a sloping roof?

Measure the roof from above, then multiply the area by √(1 + (rise ÷ 12)²). For a 6 in 12 slope that is 1.118. The page does it when you type the rise in Roof slope.

How much waste should I allow?

It is your choice. More cuts and odd shapes need more. The page starts at 10% and you can set any number from 0 to 100.

What is kerf?

The width of the strip the saw blade removes. It is lost as sawdust, so the page leaves that gap between pieces. Type your blade width in Saw cut width.

Can I turn pieces to save wood?

Yes, tick Allow turning pieces 90°. Plywood has a face grain, so leave it off when the grain direction matters for strength or looks.

Does it find the best layout?

It tries several row layouts and keeps the one with the fewest sheets. A careful layout by hand can sometimes save a sheet, so treat the count as a safe plan.

Can I save the cut layout?

Yes. In Cut list, press Save layout as SVG. You get a drawing of every sheet with the piece sizes that opens in a browser or a drawing program.

Can I use metric sizes?

Yes. Pick the 1220 x 2440 mm sheet or a custom size, and type pieces in millimetres or centimetres.

Does it include the cost?

If you type a price per sheet, it multiplies it by the number of sheets.

Listed on

Listed on JustMacAppsMotionShine on Mac App IndexMotionShine on ScrollLaunchMotionShine featured on StartupBaseFeatured on FazierFeatured on Twelve ToolsMotionShine - Featured on Smol Launch