Short answer: In the pages read for this post, a cubic yard of loose gravel or crushed stone weighs about 2,400 to 3,100 lb, which is 1.2 to 1.55 short tons. A common middle figure is about 2,700 lb, or 1.35 tons. A yard laid and compacted weighs more: 3,700 lb (1.85 tons) in the Washington State DOT table. Concrete is different again: about 4,050 lb a yard.
Your own supplier's number beats any table, because stone type and moisture change it. To turn your driveway or path into yards and tons, use the free gravel calculator. For slabs and footings, use the concrete calculator.
All figures below come from pages I read on 13 November 2026, and each row says where it is from. Where I found no readable source, I wrote "not stated" or "ask your supplier". The free tools are made by the maker of MotionShine, and what I say about them comes from their own pages and scripts.
What a yard of gravel weighs, by source
| Source | Material | Condition | Pounds per cubic yard | Short tons per cubic yard |
|---|---|---|---|---|
| Graniterock (a California quarry) | Southside 1 1/2 inch round rock | Air dried, product page | 2,711 | 1.36 |
| Muthler Landscaping (a Pennsylvania landscaping and stone company, article dated 23 October 2026) | Crushed limestone No. 57 or No. 4 | Loose, in the truck | 2,400 | 1.20 |
| Same page | Gravel No. 57 or No. 4 | Loose, in the truck | 2,500 | 1.25 |
| Same page | Bank-run gravel or gravel crusher run | Loose, in the truck | 2,700 | 1.35 |
| Same page | Pea gravel, 3/8 inch | Loose, "about", worked out from coverage per ton | 2,700 | 1.35 |
| WSDOT Design Manual M 22-01.23, Exhibit 620-1 (September 2024) | Crushed surfacing top course | Truck measure, dry | 2,850 | 1.43 |
| Same exhibit | Crushed surfacing base course | Truck measure, dry | 2,950 | 1.48 |
| Same exhibit | Ballast | Truck measure, dry | 3,100 | 1.55 |
| Same exhibit | Crushed surfacing, screened gravel | Compacted on the roadway, dry | 3,700 | 1.85 |
| Same exhibit | Gravel base | Compacted, dry | 3,400 to 3,800 | 1.70 to 1.90 |
| Muthler Landscaping | Dense-graded base | Compacted | 3,800 to 4,000 | 1.9 to 2.0 |
Two things stand out. Loose stone in a truck sits in a fairly tight band, about 2,400 to 3,100 lb. And the same stone laid and compacted is heavier per yard, because the pieces are packed closer together. The Washington table lists both for each material, so you can see the jump: ballast goes from 3,100 to 3,900 lb.
Muthler's page says "Your local stone will not match these to the pound", and Graniterock says its calculators "should be used only as guides". Both are right. Pea gravel, river rock, limestone and sand differ from place to place, and the gravel calculator builds in no density for them for that reason. You type the one from your supplier.
How many pounds are in a yard of gravel?
Most loose gravel is about 2,400 to 3,100 lb a cubic yard in the sources above, with 2,700 lb a good middle figure. Compacted base is heavier, about 3,700 to 4,000 lb.
To find the weight of your own pile, multiply the yards by the pounds per yard. Six yards at 2,700 lb is 6 x 2,700 = 16,200 lb.
How many tons are in a cubic yard of gravel?
Loose gravel is about 1.2 to 1.55 short tons a yard in the sources above, and 1.35 is the usual middle. Divide the pounds per yard by 2,000: 2,700 / 2,000 = 1.35.
Check which ton your quote means. A short ton is 2,000 lb. A tonne, or metric ton, is 1,000 kg, which is about 2,205 lb. The gravel calculator shows both.
How much does a yard of gravel weigh?
About 1.35 tons, or 2,700 lb, for common gravel and crusher run, with a loose range of 1.2 to 1.55 tons across the stones above. Graniterock's own round rock is 2,711 lb, which is 1.36 tons.
If the stone is wet, it weighs more. The WSDOT exhibit gives the rule: multiply the dry weight by one plus the free water as a decimal. With 5% water, 2,700 x 1.05 = 2,835 lb. That 5% is an example I picked, not a measured figure.
How many yards are in a ton of gravel?
Divide 2,000 by the pounds per yard. At 2,700 lb a yard, one ton is 2,000 / 2,700 = 0.74 cubic yards, or about 20 cubic feet. In other words, a yard is about 1.35 tons.
| Pounds per cubic yard | Short tons per yard | Cubic yards in one ton |
|---|---|---|
| 2,400 | 1.20 | 0.83 |
| 2,500 | 1.25 | 0.80 |
| 2,700 | 1.35 | 0.74 |
| 2,850 | 1.43 | 0.70 |
| 3,100 | 1.55 | 0.65 |
| 3,700 | 1.85 | 0.54 |
How many tons is 6 yards of gravel?
At 2,700 lb a yard, 6 cubic yards is 16,200 lb, which is 8.1 short tons. The table shows the spread from the lightest to the heaviest stone in the sources.
| Pounds per cubic yard | Weight of 6 yards (lb) | Short tons | Tonnes |
|---|---|---|---|
| 2,400 | 14,400 | 7.2 | 6.53 |
| 2,700 | 16,200 | 8.1 | 7.35 |
| 3,100 | 18,600 | 9.3 | 8.44 |
| 3,700 (compacted) | 22,200 | 11.1 | 10.07 |
So 6 yards could be 7 tons or 11, depending on the stone and whether you mean the volume in the truck or laid. Ask the supplier for the weight per yard of the stone you are buying.
Worked example: a driveway strip
A strip 20 ft long, 10 ft wide and 4 inches deep.
- Convert the depth to feet: 4 / 12 = 0.3333 ft.
- Volume: 20 x 10 x 0.3333 = 66.67 cubic feet.
- Cubic yards: 66.67 / 27 = 2.47 yards.
- Add 10% for waste: 2.47 x 1.10 = 2.72 yards. (The gravel calculator starts at 10% waste, and the WSDOT notes call for 10% extra for stockpiled material.)
- Weight at 2,700 lb a yard: 2.72 x 2,700 / 2,000 = 3.67 short tons.
- If the stone is compacted base at 3,700 lb a yard: 2.72 x 3,700 / 2,000 = 5.02 short tons.
Same strip, two answers. The difference is the stone, and that is why the calculator asks you to pick the stone, or type your supplier's density, before it shows tons.
How much does a yard of concrete weigh?
About 4,050 lb, or roughly 2 short tons, for ordinary concrete. California's safety orders, Appendix B, Plate B-3, list concrete at 150 lb per cubic foot, "4050 lbs. per cu. yd." 150 x 27 = 4,050.
A second check: the Caltrans Concrete Technology Manual (chapter 3, June 2013) works through a sample mix per cubic yard, and its batch weights add up to 4,047 lb: 1,214 + 1,820 + 472.5 + 67.5 + 135 + 338. That is a worked example with assumed inputs, not a delivered load. A real mix changes with the stone, the water and any steel. For a hauling or structural load, ask the supplier for the mix's unit weight.
Do not mix this up with broken concrete. Los Angeles County's volume-to-weight table lists loose scrap concrete at 1,855 lb a cubic yard, and Muthler lists recycled concrete at 2,250 lb. Crushed pieces have gaps between them, so a yard weighs much less than a yard of solid concrete.
A 10 ft by 10 ft slab 4 inches thick holds 10 x 10 x (4 / 12) = 33.3 cubic feet, so at 150 lb per cubic foot it weighs about 5,000 lb, or 2.5 short tons.
How much does a cubic yard of concrete cover?
At 4 inches thick, one cubic yard covers 81 square feet. Check it: a yard is 27 cubic feet, and 4 inches is 1/3 foot, so 27 / (1/3) = 81. For any thickness, divide 27 by the thickness in feet.
| Thickness | Square feet one yard covers |
|---|---|
| 3 inches | 108 |
| 4 inches | 81 |
| 5 inches | 64.8, about 65 |
| 6 inches | 54 |
| 8 inches | 40.5, about 41 |
Concrete Network's page on this (by Anne Balogh, published 15 September 2023, read 13 November 2026) gives 81, 65, 54 and 41 for 4, 5, 6 and 8 inches, which match. It also suggests ordering 10% to 15% more than planned for spills and uneven ground.
This is the same math as gravel: a cubic yard is 27 cubic feet, so the coverage at any depth is the same for either material.
How many yards of concrete do I need?
Multiply length by width by thickness, all in feet, then divide by 27. Add a margin for waste.
- A 10 x 10 ft slab, 4 inches thick: 10 x 10 x 0.3333 = 33.3 cubic feet, 33.3 / 27 = 1.23 yards. With 10% extra, 1.36 yards.
- A 20 x 20 ft slab, 4 inches thick: 400 x 0.3333 = 133.3 cubic feet, 4.94 yards. With 10% extra, 5.43 yards.
- A 10 x 12 ft pad, 4 inches thick: 120 x 0.3333 = 40 cubic feet, 1.48 yards. With 10% extra, 1.63 yards.
The concrete calculator does slabs, round columns, tubes and steps, adds your waste percent, and shows bags. Its page uses bag yields from the QUIKRETE Concrete Mix data sheet, read 17 October 2026: an 80 lb bag yields 0.60 cubic feet, so a yard is 27 / 0.60 = 45 bags. Other brands print their own yield on the bag. For big pours, ready-mix by the yard is usually easier than mixing bags. Ask your supplier about minimum loads and short-load fees, which this post does not state.
Check the numbers
- Pounds to tons: divide by 2,000 (short tons) or by 2,204.62 (tonnes).
- Yards to tons: yards x pounds per yard / 2,000.
- Tons to yards: tons x 2,000 / pounds per yard.
- Cubic feet to yards: divide by 27.
- Concrete coverage: 27 / thickness in feet.
For other unit changes, such as cubic feet to cubic meters, use the free unit converter. For the area of an odd-shaped bed before you start, the square footage calculator adds pieces and takes cut-outs away.
FAQ
Does gravel weigh more when it is wet?
Yes. The WSDOT exhibit says its weights are dry and tells you to correct for water by multiplying by one plus the free water as a decimal. It gives no typical moisture figure, so ask your supplier what their stockpile holds.
Is a ton of gravel the same as a yard?
No. A yard is volume and a ton is weight. At about 2,700 lb a yard, one yard is 1.35 tons and one ton is 0.74 yards, but the ratio moves with the stone.
Are these short tons or metric tons?
Short tons of 2,000 lb, unless a line says tonnes. One short ton is 907.18 kg, and a tonne is 1,000 kg. Check which one your supplier prices in.
Why does compacted gravel weigh more per yard?
Because laid and rolled stone has less air between the pieces, so more stone fits in the same yard. WSDOT lists 2,950 lb for base course in the truck and 3,700 lb compacted. If you order for a compacted layer, work out the yards laid, then ask how much loose stone makes it.
How much does pea gravel weigh per yard?
The only pea gravel figure I found on a supplier page was about 2,700 lb, or 1.35 tons, and that page says it was worked out from coverage per ton. Other sources I did not read give other numbers, so ask your supplier.
How many square feet does a yard of gravel cover?
Divide 324 by the depth in inches. At 3 inches a yard covers 108 square feet, and at 4 inches, 81. The gravel calculator shows the table and the weight for 100 square feet.


