Black Friday: 50% off every paid plan with code BF50. Ends 5 December.

See prices

Blog / Editing recordings

How to change the DPI of an image

Changing DPI is a one-click edit, but it only changes a label. Here is how to set 300 DPI for free, what the number really does, and how many pixels a print needs before 300 means anything.

Short answer: Drop the JPG or PNG into the free change image DPI tool, press 300, and download. The tool rewrites only the density number in the file, and it leaves every pixel as it was. That is all DPI is: a label that tells a printer how big to print. The print size is the pixels divided by the DPI, so a photo only prints at 300 DPI for a given size if it has enough pixels. An 8 x 10 inch print needs 2400 x 3000 pixels. If yours is smaller, setting 300 will not help, and you need more pixels.

The free tools are made by the maker of MotionShine, and what I say about them comes from their own pages. The Preview and Photoshop Elements steps come from Apple Support and Adobe Help, read on 13 November 2026.

What DPI really is

DPI means dots per inch. In an image file it is one stored number, the pixels per inch a printer should use. It does not add or remove a pixel. A screen shows pixels and ignores it.

The only sum you need is this: printed size in inches = pixels divided by DPI. The tool's page gives the same rule, and I worked the numbers below myself with Python.

PicturePrints at 300 DPISame file labelled 72 DPI
1600 x 1200 px5.33 x 4 in22.22 x 16.67 in
3000 x 2000 px10 x 6.67 in41.67 x 27.78 in
4000 x 3000 px13.33 x 10 in55.56 x 41.67 in
2400 x 3000 px8 x 10 in33.33 x 41.67 in

The picture is the same in every row. Only the label changes, which is why a lower DPI number does not make a picture worse and a higher one does not make it sharper.

How to change the DPI of an image

This is the label edit, done in your browser with nothing uploaded.

  1. Open change image DPI. Drop one or more JPG or PNG files on the box, or paste one with Command V.
  2. Under DPI, press 72, 150, 300 or 600, or type your own number in Or type your own. The page accepts 1 to 10000.
  3. Read the printed size at the top. The table under it shows the same picture at 72, 96, 150, 300 and 600 DPI.
  4. Leave Keep the pixels on, so only the number changes.
  5. Press Download the picture, or Download all as ZIP for many files.

The message under the picture says how many bytes changed. According to the page, a JPG gets its density rewritten in the JFIF header, and the EXIF and Photoshop resolution notes are updated too when the file has them, so no program reads the old value. A PNG gets the pHYs chunk, which stores pixels per metre: 300 DPI is 300 divided by 0.0254, or 11811 pixels per metre. The colour profile and the picture data are left alone, and the file size stays the same apart from a few bytes.

HEIC and WebP are not supported, since they do not store a DPI the same way. Convert them to JPG first with the image converter.

How to change a photo to 300 DPI

Setting 300 takes a second. Whether the photo is good at 300 depends on its pixels, so check them first. These are the pixels each common print size needs at 300 DPI, which is the size times 300.

Print sizePixels needed at 300 DPIMegapixels
4 x 6 in1200 x 18002.16
5 x 7 in1500 x 21003.15
8 x 10 in2400 x 30007.2
Letter, 8.5 x 11 in2550 x 33008.41
11 x 14 in3300 x 420013.86

Compare your photo's pixel size with the row you want:

  • Your photo has the pixels or more. Press 300 with Keep the pixels on and you are done. A 4000 x 3000 phone photo is already 13.33 x 10 inches at 300 DPI.
  • Your photo is short of the pixels. A 1600 x 1200 photo set to 300 DPI prints only 5.33 x 4 inches. You can still print it larger, but each pixel is spread wider, so it looks softer. See below.

A print shop that asks for 300 DPI is really asking for enough pixels for the size you ordered. Check the pixels, not the label.

When you need more pixels

If the photo is too small, there are two honest routes.

Resample to the paper size. In the DPI tool, switch from Keep the pixels to Resample, choose a print size such as 8 x 10 in, and decide whether the picture fills the size and crops the edges or keeps the whole picture. The page says the tool turns the sheet to match the picture, so a wide picture gets a wide sheet, and at 8 x 10 inches and 300 DPI the result is 2400 x 3000 pixels. It also writes the DPI. The colour profile is kept, but camera details are not copied. Resampling draws the picture again, so it stretches the pixels you have.

Enlarge it properly. For 2x and more, an AI upscaler draws new edges instead of only stretching. The AI image upscaler is a free browser tool, and how to enlarge a photo without losing quality shows when it helps. To set exact pixels yourself, the image resizer takes a width and height, or a percent. It starts with Never make a picture bigger turned on, so switch that off to enlarge, up to 400 percent, according to its page. Its page does not say it sets the DPI, so run the result through the DPI tool afterward.

No tool can add detail the camera never captured. If a 640 x 480 picture is blown up for a poster, it will look soft however the DPI is set.

Change DPI on a Mac or in Photoshop Elements

You can do it without a web tool.

  • Preview on a Mac. Apple Support says to open the picture and choose Tools, then Adjust Size. If you turn Resample image off before you change width or height, the dimensions change without losing detail, so the pixel count stays. If Resample image is on, Preview changes the resolution and the Resolution field is available. Apple's page does not discuss DPI as such, and it points to lowering the resolution to reduce file size.
  • Photoshop Elements. Adobe's help says that to change width and height without changing the total number of pixels, with Resolution recalculated, you deselect Resample Image. Select it when you want to change the pixel dimensions. Adobe's page for screen images says to ignore the resolution value and look only at the pixel dimensions.
  • Check what a file says now. The DPI tool shows the DPI each file says. On a Mac you can also run sips -g dpiWidth file.jpg in Terminal. I ran it on a test JPG made on macOS 15 and it printed 72.000.

Common problems

  • The print shop still says 72 DPI. Some programs read a different field. The DPI tool writes the JFIF, EXIF and Photoshop values it finds, so they should agree. Check the pixels as well.
  • The file looks the same on screen. It should. A screen shows pixels and ignores DPI.
  • The file size did not change. Also expected. Keep the pixels changes a few bytes at most.
  • The picture prints smaller than I hoped. Divide its pixels by 300. That is the biggest size it holds at 300 DPI.
  • Screens and web pages. For these, the pixel dimensions are what count, so the number in the DPI box makes no difference.

FAQ

How can I change the DPI of an image?

Open the change image DPI tool, drop the JPG or PNG, press the DPI you want and download. The tool changes only the number and keeps the pixels. On a Mac you can also use Preview's Adjust Size.

How do I change a photo to 300 DPI?

Press 300 in the tool, then check the pixels. At 300 DPI the print size is the pixels divided by 300, so an 8 x 10 inch print needs 2400 x 3000 pixels. If you have fewer, resample or enlarge.

Does changing DPI change the quality?

No. With Keep the pixels the picture data is not touched, so quality and file size stay the same. DPI only says how large to print.

Is a 72 DPI image the same as a 300 DPI image?

If both have the same pixel size, yes. A 3000 x 2000 picture is 41.67 x 27.78 inches at 72 DPI and 10 x 6.67 inches at 300 DPI.

Which formats can I change?

JPG and PNG. HEIC, WebP and other types are not supported by the tool, so convert them to JPG first.

Are my pictures uploaded?

No. The tool's page says the files are read and written in your browser, and nothing goes to a server.

Keep reading

Make your next recording look finished.

MotionShine is free for good, with every feature. Pay only if you want bigger exports.

Listed on

Listed on JustMacAppsMotionShine on Mac App IndexMotionShine on ScrollLaunchMotionShine featured on StartupBaseFeatured on FazierFeatured on Twelve ToolsMotionShine - Featured on Smol Launch