Short answer: Drop your video and a song file into the free add music to video tool. Press Play to hear the mix, set the music to about 40% if someone talks in the video, choose where the song starts, and download the MP4. It runs in your browser, so nothing is uploaded, and its page says there is no watermark. On a Mac you can also use iMovie, which is free from Apple. The song is the part to check: free to add does not mean free to use. This is not for you if you need a library of tracks to pick from, because this tool uses a file you bring.
Apple's steps come from Apple Support's iMovie guide, and the song rules from YouTube Help, all read on 13 November 2026. The tool is made by the maker of MotionShine, and what I say about it comes from its own page.
How to put music over a video for free
The quickest free way is the browser tool, because you hear the result before you save it.
- Open add music to video. Drop your video on the box. MOV, MP4, WebM and MKV work. You can drop the video and the song together.
- Click Choose the music and pick an MP3, M4A, WAV, AAC, OGG or FLAC file.
- Press Play. You hear the video with the song under it. Change Music volume and Video sound volume until the voice is clear. The defaults are 40% for the music and 100% for the video.
- To use a different part of the song, drag the lit part of the song lane, or type a time in Song starts from, for example 0:45.
- To start the music later, pause at the right moment and click Start the music here, or type a time in Music starts at.
- If someone talks in the video, tick Lower the music while the video has sound of its own. The page says the music drops to 30% wherever the video's own sound is clear and comes back up between sentences.
- Choose MP4 or MOV in Save as, click Add the music, play the result in the page, then download it.
According to the page, the picture is copied as it is and only the sound is new, so the quality does not drop. The saved file has one new sound track, AAC at 192 kbps, and its name ends in -with-music, so your original stays as it is. It works in current Chrome, Edge and Safari.
Which way fits your job
| Your job | Use this | Weak point |
|---|---|---|
| I have a video and a song file and want to hear the mix first | Add music to video | No music library, you bring the file |
| I am on a Mac and want titles, several clips and music in one project | iMovie | A bigger app to learn |
| I want the editor to supply royalty-free tracks | An online editor with its own library, such as ScreenPal | Check each one's free limits, see below |
| The video is a screen recording | An editor built for screen recordings, such as MotionShine | Mac only |
Add music to a video online for free with no watermark
Many online editors offer free music, so the useful questions are what each one says about limits and watermarks. These are the facts from each maker's own page, checked on 13 November 2026.
| Tool | Music | What its page says about limits and watermark |
|---|---|---|
| MotionShine add music to video | Your own file | No watermark, no sign-up, runs in your browser, nothing uploaded |
| SlideSpeak add music to video | Six built-in royalty-free tracks, or your own | Video up to 200 MB, MP4, MOV or WebM, no watermark, no sign-up |
| Riverside add music to video | A license-free library, or your own | Accepts MP3, WAV, MP4 and MOV. Free plan limits and watermark: not stated on that page |
| ScreenPal | A built-in royalty-free library, or your own | Free limits and watermark: not stated on the article |
Page sources: slidespeak.co/free-tools/add-music-to-video, riverside.com/tools/add-music-to-video and screenpal.com/blog/how-to-add-music-to-a-video. "Not stated" means the page did not say, not that there is no limit.
Where can I add music to a video?
On a Mac, iMovie is the free Apple app for it. According to Apple Support, you open your project, click Audio, choose Music in the sidebar, then drag a song into the timeline. Drop it under a video clip to attach it to that clip, or into the music well to make it background music that stays put when you move clips.
Apple's page also says:
- To use only part of a song, select a range in the waveform and drag that range to the timeline.
- You can drag M4A, MP4, MP3, WAV or AIFF files from the Finder straight into the timeline.
- Protected files in your music library do not appear in the browser.
- To use a song bought from the iTunes Store, you need to be the copyright holder or have express permission from the copyright holder.
Apple's iMovie pages in the same guide list "Change audio volume" as a separate topic, and the steps are on that page. QuickTime Player is the other free Apple app, but the page of its guide on adding clips covers only movie clips and does not mention music, so use iMovie for this job.
How can I add a song to a video for free?
Use any song file you have the right to use, and add it with the browser tool or iMovie. The file has to be one your browser can play: a song with copy protection (DRM) cannot be read by the tool, according to its page. Music you made yourself, a royalty-free library or YouTube's own Audio Library are the safe sources.
What volume should the music be?
The tool has two sliders from 0% to 150%. At 100% a sound stays as loud as it was in its own file. The decibel figures below are from its page, and I checked them with 20 x log10 of the slider value.
| Music slider | Change in level | Use it for |
|---|---|---|
| 20% | About 14 dB quieter | Soft music under someone talking fast or quietly |
| 40% | About 8 dB quieter | A voice over or a tutorial, the default |
| 100% | No change | A montage or a clip with no talking |
| 150% | About 3.5 dB louder | A quiet track that needs a lift |
Every song is mixed at its own loudness, so treat these as a start and trust your ears. Play the first sentence of speech, and if you have to strain to hear the words, lower the music. A song with sung words competes with spoken words, so an instrumental track sits under a voice better.
If the music is shorter than the video, leave Repeat the music ticked and it starts again from the point you chose until the video ends. If it is longer, it is cut off when the video ends, and Fade out at the end softens the cut.
Can I use any song? The royalty and copyright side
You can add any file your browser can play, but that does not give you the right to publish it. Here is what YouTube Help says, in plain words.
- The Audio Library is the safe route on YouTube. YouTube says music and sound effects from its Audio Library are copyright-safe, and creators in the YouTube Partner Program can monetize videos that use them.
- Some tracks need a credit. Creative Commons tracks in the library require you to credit the artist in the video's description, and the library can generate the text. Tracks under the standard license need no credit, and you can filter for them.
- A note saying "free" does not protect you. YouTube says Content ID can still flag a video when its description calls a song free, if the music is not copyright-safe.
- Other sources are your job to check. YouTube says it does not vouch for royalty-free music from other places, and it gives no legal advice. Its page on safe music says to review a third-party site's license first, because the license decides where and how you can use the track.
- Short and long videos differ. For longer videos, YouTube's page says to stick to the Audio Library or Creator Music, because music that is safe in a Short under 60 seconds may not be safe in a longer video.
This is not legal advice. For a client video, an ad or anything you sell, read the license of the exact track.
Tips that make it sound better
- Clean the voice first. Music will not hide hum or room noise. Run the recording through remove background noise before you add the song.
- Match the energy. A calm tutorial wants a quiet, steady track, and a launch video can take something faster.
- Start the music after the first sentence. Use Music starts at, so the first words are clear.
- Need to cut the song first? Trim it with the audio cutter, or join two songs with the audio joiner and add the result as the music.
FAQ
How to add music to a video free?
Drop the video and a song into the free add music to video tool, listen to the mix, then download the MP4. Or use iMovie on a Mac. Either way, check that you may use the song.
Can I add music to a video with no watermark?
Yes. The add music to video tool's page says the video comes back with only your picture and the new sound. SlideSpeak's page also says no watermark. For other tools, read the page, because some do not say.
Does adding music lower the video quality?
Not with this tool. Its page says the picture is copied as it is and only the sound is new.
Is my video uploaded?
No. The tool's page says the music is added in your browser tab and the file never leaves your computer.
What if the video already has speech or its own sound?
Keep Video sound volume at 100% and set the music to 20% to 40%, and tick the option that lowers the music while the video has sound. To replace the old sound completely, set the video sound to 0%.
Can I use a song from Spotify or Apple Music?
Probably not as a file. A song with copy protection cannot be read by the tool, and Apple's iMovie page says protected files in your library do not appear. Even a song you can play is not yours to publish, so use music you have the rights to.


